Friday, July 6, 2018

Things to Consider with Workstation Jib Crane Design

Jib cranes are a must-have system for organizations that seek a cost-effective solution for moving materials in the workplace. However, as with all things in life, it is advisable always to consider your options carefully before you select the suitable workstation jib crane design and capacity for your venture.

When choosing a workstation jib crane design for your specific application, it is essential to consider its design carefully. Consequently, here are some of the factors you should bear in mind:

Workstation Jib Crane Design | Lifting Capacity

The primary function of jib cranes is to lift and transfer materials around their support structure. So, it is critical to consider this option carefully. First, you will need to determine the lifting that is required. After that, you will also have to decide where you want the system to be located. This can be on the floor, wall, ceiling, etc., depending on your specific need.

Different ergonomic crane systems are designed to lift different loads. So, you may want to conduct some research before you decide on any lifting tool. If you intend doing the heavy lifting, then it is recommended to go with a jib crane that offers a higher load capacity, as it is designed to tackle heavy lifting. The more capacity a system provides, the more suitable it is for heavy lifting operations.

Overall Height

Another factor you should consider is the height to the highest point on the crane after it has been installed. You should also bear in mind attachments such as electrical entry, as it will influence the rotational potential and freedom of the system.

Height Under Boom

Height under the boom is yet another design element to consider when it comes to workstation jig crane design. The size of the hoist, as well as the amount of lifting distance, should matter when choosing a boom. You want to make sure to you fit the jibs in an area where they can move freely so that their capacity can be maximized. Asides that, you’ll also need to consider the size of the material that you intend to lift.

Weatherization

Will the system be used outdoor? If so, should it or its electrical parts be weatherized for such use?

The Power Angle

How much power do you think is needed? Do you need power for any of the rotation, hoist, or trolley or would want to power all three? Do you have an idea on how the power will be supplied?

Boom Rotation

How much lifting access do you intend to provide the machinery? Some jib cranes can rotate up to 360°. Do you want a system that has a full 360-degree rotation or prefers the one that delivers 180° of rotation? Note that jib cranes that support 360-degree rotation can be applied to a lot more uses than those that don’t.

The post Things to Consider with Workstation Jib Crane Design appeared first on Overhead Crane Manufacturer | Overhead Crane Systems & Jib Cranes .



from
https://overheadcrane-manufacturer.com/workstation-jib-crane-design/

No comments:

Post a Comment